CURRENT INDUSTRIAL REPORTS United States Department of Commerce Economics and Statistics Administration Bureau of the Census STEEL MILL PRODUCTS - 1996 MA33B(96)-1 Issued August 20, 1997 Information on the scope of the survey, methodology, definition of terms and historical notes for this survey maybe found in the introduction of the 1995 Manufacturing Profiles, issued June 1997. These data are also available through the U.S. Department of Commerce and STAT-USA Electronic Bulletin Board by subscription. To access, dial 202-482-3870 and follow the prompt to register; or call 202-482-1986 for further information. Address inquiries concerning these data to U.S. Department of Commerce, Bureau of the Census, Manufacturing and Construction Division, Washington, D.C. 20233, or call Renee Coley, 301-457-4742. Table 1. Value of Shipments of Steel Mill Products by Class of Products: 1996 and 1995 (Value in thousands of dollars) Product code Product description 1996 1995 Total. . . . . . . . . . . . . . . . . 65,990,081 66,290,835 33122 Steel ingot and semifinished shapes. . 4,630,064 4,507,013 33123 Hot rolled sheet and strip, including tin mill products 1/. . . . . . . 21,784,811 22,150,260 33124 Hot rolled bars and shapes, plates, structural shapes, and piling. . . . 12,503,579 12,821,931 33155 Steel wire. . . . . . . . . . 2,237,746 2,326,919 3315- Other wire products. . . . . . . 2,060,354 2,021,554 33170 Steel pipe and tube. . . . . . . 8,650,625 8,356,064 33167 Cold rolled steel sheet and strip. . . 11,456,101 11,346,478 33168 Cold finished steel bars and bar shapes. 2,188,096 2,312,078 3312C Other steel mill products, except wire products. . . . . . . . . . . . 478,705 448,538 1/Galvanized, metallic coated, and electrical sheet and strip are included in product class 33123, hot rolled sheet and strip. Table 2. PRODUCTION OF RAW STEEL: 1996 and 1995 (Thousands of metric tons) Product description 1996 1995 Total. . . . . . . . . . . . . . . . 94,307 94,063 By grade of steel: Carbon. . . . . . . . . . . . . . . . 82,813 81,846 Alloy. . . . . . . . . . . . . . . . . 9,582 10,137 Stainless. . . . . . . . . . . . . . . 1,912 2,079 By type of furnace: Electric. . . . . . . . . . . . . . . . 38,145 r/37,529 Basic oxygen, open hearth, and other types of furnaces. . . . . . . . . . . . . . 56,163 56,534 r/Revised by 5 percent or more from previously published data. Table 3A. Receipts, Consumption, Shipments, and Net Shipments of Steel Mill Products: 1996 (Quantity in metric tons. Value in thousands of dollars) Steel Total shipments consumed in Number Receipts producing Value Net Product of com- 2/ 3/ plants f.o.b. shipments 4/ code 1/ Product description panies (quantity) (quantity) Quantity plant (quantity) Steel. . . . . . . . . . . . (NA) 26,524,340 1,835,474 112,162,215 65,990,081 87,473,349 Carbon steel, total. . . . . . . . . 278 23,987,851 1,662,015 100,190,087 52,491,100 77,864,252 33122 11 Ingots. . . . . . . . . . . . . 6 (D) (D) 136,292 59,192 262,690 Semifinished products: 33122 13 Blooms, billets, sheet bars, tin mill bars, tube rounds, and skelp. . . . . . 34 (D) (D) 2,553,920 833,629 (D) 33122 19 Wire rods. . . . . . . . . . . .. 20 2,940,324 148,164 4,918,313 1,823,737 2,126,154 33122 20 Slabs. . . . . . . . . . . . .. 12 676,259 1,703 848,391 235,128 173,835 Finished products: 33124 13 Plates, cut lengths. . . . . . . . 16 (D) (D) 4,126,674 2,003,183 3,933,662 33124 14 Plates, in coils. . . . . . . . . 6 (D) (D) 314,126 123,579 267,798 Sheet: 33123 11 Hot rolled, including hot rolled bands. 25 11,801,642 637,069 19,985,955 7,842,070 8,821,382 33167 11 Cold rolled. . . . . . . . . . 26 1,383,952 370,309 14,391,072 7,315,037 13,377,429 Sheet and strip: Galvanized: 33123 13 Hot dipped. . . . . . . . . . 16 (D) (D) 8,617,323 5,554,131 8,482,159 33123 15 Electrolytic. . . . . . . . . 13 (D) (D) 2,763,423 2,043,669 2,750,604 33123 17 Electrical. . . . . . . . . . .. 3 (D) (D) (D) (D) (D) 33123 18 All other metallic coated, including long ternes. . . . . . . . . . . 11 (D) (D) 1,041,887 780,352 1,031,968 Strip: 33123 19 Hot rolled. . . . . . . . . . .. 18 (D) (D) 2,438,527 954,964 1,858,105 33167 15 Cold rolled. . . . . . . . . . 21 (D) (D) 1,213,960 1,088,073 1,052,166 Tin mill products: 33123 24 Black plate. . . . . . . . . . 9 (D) (D) 518,271 278,280 499,607 33123 26 Electrolytic and hot dipped tin plate. .. 8 (D) (D) 2,683,683 1,813,166 2,695,582 33123 28 Tin free steel. . . . . . . . . 5 (D) (D) 466,915 302,925 466,915 33123 29 All other tin mill products, including short ternes and foil. . . . . . .. 2 - - (D) (D) (D) Structural shapes (heavy): 33124 15 Wide flange. . . . . . . . . . 5 - - (D) (D) (D) 33124 17 Standard heavy shapes. . . . . . . 10 - - 2,256,898 1,035,192 2,256,898 33124 18 Sheet piling and bearing piles. . . . .. 4 - - (D) (D) (D) Bars: 33124 22 Hot rolled, except concrete reinforcing. 35 979,274 7,481 6,132,372 2,837,299 5,160,579 33124 24 Light structurals, under 3 inches. . . 9 (D) (D) 1,355,087 533,829 1,354,906 33124 26 Concrete reinforcing. . . . . . . 19 (D) (D) 4,927,159 1,633,623 4,953,890 33168 11 Cold finished. . . . . . . . . .. 36 (D) (D) 1,320,589 1,094,874 1,256,076 3312C -- Rails, wheels, and track accessories 5/. . 9 (D) (D) 732,572 478,705 642,679 Pipe and tube: Line pipe: 33170 14 16 inches O.D. and under. . . . . 23 (D) (D) 1,114,575 649,167 1,115,076 33170 15 Over 16" O.D. . . . . . . . . 8 - - 479,011 325,633 479,011 33170 19 Oil country goods. . . . . . . . 15 (D) (D) 1,197,158 801,528 1,205,600 Pressure tubing: 33170 21 Seamless. . . . . . . . . . .. 8 (D) (D) 53,748 79,257 47,040 33170 22 Welded. . . . . . . . . . . 15 (D) (D) 340,800 404,112 341,532 Mechanical tubing: 33170 23 Seamless. . . . . . . . . . .. 13 (D) (D) 106,265 128,516 104,458 33170 24 Welded. . . . . . . . . . . 57 54,519 41,780 2,063,922 2,006,977 2,051,183 33170 27 Structurals. . . . . . . . . . 25 (D) (D) 1,238,952 760,877 1,235,324 33170 29 Miscellaneous, including standard pipe. 30 (D) (D) 1,472,925 1,006,923 1,469,870 Wire: Plain wire: 33155 01 Flat wire. . . . . . . . . . 8 (D) (D) 30,485 34,392 28,312 Round wire: Thermally treated: 33155 02 Under 1.5 mm in diameter. . . . 17 (D) (D) 53,533 61,002 16,010 33155 03 1.5 mm or above in diameter. . . 22 (D) (D) 226,184 188,159 176,858 Other round wire: 33155 04 Under 1.5 mm in diameter. . . . 12 (D) (D) 222,699 268,335 140,717 33155 05 1.5 mm or above in diameter. . . 36 (D) (D) 1,151,257 637,263 936,606 33155 06 Other shape wire. . . . . . . . 10 (D) (D) 274,665 134,613 274,541 Plated or coated with zinc: Round wire: 33155 13 Under 1.5 mm in diameter. . . . . 12 (D) (D) 55,202 48,296 39,605 33155 14 1.5mm or above in diameter. . . . 23 (D) (D) 270,276 183,625 189,216 33155 15 Other shape wire, including flat. . .. 9 (D) (D) 76,335 55,003 51,002 Other coated wire: 33155 17 Flat wire. . . . . . . . . . 2 (D) (D) (D) (D) (D) 33155 18 Round wire. . . . . . . . . . 18 (D) (D) 121,761 132,534 125,769 33155 21 Other shape wire. . . . . . . . 6 (D) (D) 48,844 59,497 48,834 Wire products: 6/ 33152 21 Nails and staples. . . . . . . . 23 (D) (D) 602,759 724,978 601,746 33159 51 Barbed and twisted wire. . . . . . 8 (D) (D) 154,834 166,757 154,830 33156 21 Wire fence, woven and welded. . . . . 12 (D) (D) 422,823 285,040 421,961 33159 55 Bale ties. . . . . . . . . . . 7 - - 31,811 25,812 31,811 33151 13 Wire rope and cable. . . . . . . .. 14 (D) (D) 170,607 345,662 170,104 Wire strand: 33151 33 For prestressed concrete. . . . . 8 - - 242,722 160,818 242,722 33151 35 Other. . . . . . . . . . . .. 15 - - 222,008 259,598 222,008 33157 71 Woven wire netting. . . . . . . . 10 (D) (D) 98,567 91,689 97,098 Alloy steel, total. . . . . . . . . 82 1,630,529 150,607 9,630,894 7,284,534 8,150,972 33122 31 Ingots. . . . . . . . . . . . . 12 22,250 97,874 322,631 205,045 398,254 Semifinished products: 33122 37 Blooms, billets, sheet bars, rounds, and skelp. . . . . . . . . . . . .. 18 (D) (D) 1,604,685 897,991 568,379 33122 39 Wire rods. . . . . . . . . . . .. 4 (D) (D) (D) (D) (D) 33122 41 Slabs. . . . . . . . . . . . .. 5 (D) (D) (D) (D) (D) Finished products: 33124 33 Plates, cut lengths. . . . . . . . 7 (D) (D) (D) (D) (D) 33124 36 Plates, in coils. . . . . . . . . 3 (D) (D) (D) (D) (D) 33124 38 Structural shapes, 3 inches and under. . 4 - - (D) (D) (D) Sheet: 33123 31 Hot rolled. . . . . . . . . . 10 21,654 - 1,503,745 665,949 1,482,092 33167 31 Cold rolled. . . . . . . . . .. 8 (D) (D) (D) (D) (D) Sheet and strip: Galvanized: 33123 35 Hot dipped. . . . . . . . . . 3 - - 125,674 88,744 125,674 33123 37 All other metallic coated, including electrolytic. . . . . . . . . 6 (D) (D) (D) (D) (D) Strip: 33123 39 Hot rolled. . . . . . . . . . 4 (D) (D) 2,523 1,241 (D) 33167 35 Cold finished. . . . . . . . . 13 (D) (D) (D) (D) (D) Bars: 33124 41 Hot rolled, including structural shapes under 3 inches. . . . . . 17 (D) (D) 2,281,303 1,402,684 2,066,808 33168 31 Cold finished. . . . . . . . . 24 (D) (D) 406,210 481,350 406,154 Tool steel: 33124 48 High speed. . . . . . . . . . 7 (D) (D) 12,434 112,385 11,404 33124 49 Other than high speed. . . . . . .. 7 (D) (D) 47,164 180,804 46,259 Pipe and tube: 33170 32 Oil country goods and line pipe. . . 8 (D) (D) 940,587 774,572 864,687 33170 43 Pressure tubing. . . . . . . . .. 7 (D) (D) 9,342 30,800 8,868 33170 45 Mechanical tubing. . . . . . . . 11 (D) (D) 628,846 777,520 504,338 33170 48 Miscellaneous, including standard and structural. . . . . . . . . . 5 (D) (D) (D) (D) (D) 33155 37 Wire, plain and coated. . . . . . . 14 4,233 - 51,684 126,540 47,451 Stainless steel, total. . . . . . . . 83 905,961 22,852 2,341,234 6,214,447 1,458,125 33122 51 Ingots. . . . . . . . . . . . . 12 (D) (D 22,994 32,508 (D) Semifinished products: 33122 56 Blooms, billets, slabs, sheet bars, tube rounds, and skelp. . . . . . . . .. 15 (D) (D 257,521 399,760 97,758 33122 59 Wire rods. . . . . . . . . . . .. 4 (D) (D 33,848 105,852 24,329 Finished products: 33124 53 Plates and structurals. . . . . . . 7 6,823 - 167,158 520,475 160,336 Sheet and strip: 33123 57 Hot rolled. . . . . . . . . . .. 5 (D) (D) 510,240 873,621 (D) 33167 57 Cold rolled. . . . . . . . . . 15 (D) (D) 972,304 2,377,850 894,981 Bars: 33124 61 Hot rolled. . . . . . . . . . .. 7 (D) (D) 57,652 200,120 35,903 33168 51 Cold finished. . . . . . . . . .. 14 (D) (D) 123,978 611,872 122,795 Pipe and tube: Pressure tubing: 33170 61 Seamless. . . . . . . . . . 8 - - 9,974 107,936 9,974 33170 62 Welded. . . . . . . . . . . 12 - - 53,230 269,739 53,230 Mechanical tubing: 33170 63 Seamless. . . . . . . . . . 5 (D) (D) (D) (D) (D) 33170 64 Welded. . . . . . . . . . . 17 (D) (D) 66,160 314,362 66,159 33170 65 Other pipe and tube. . . . . . . 6 (D) (D) 3,944 26,600 3,985 Wire: Round wire: 33155 52 Under 0.75 mm in diameter. . . . . 11 (D) (D) 7,708 61,976 7,225 33155 53 0.75 mm to under 1.5 mm in diameter. . 11 169 - 4,961 31,921 4,792 33155 54 1.5 mm and above in diameter. . . . 14 (D) (D) 32,020 139,925 31,469 33155 57 Other shape wire, including flat wire. .. 11 (D) (D) (D) (D) (D) - Represents zero. D Data withheld to avoid disclosing data for individual companies. In some cases, data that are otherwise publishable are withheld to avoid disclosing by subtraction from higher-level totals or from related data. 1/Product codes in the 33155 series also include products in the 33125 series, the same applies for 33167 and 33127, 33168 and 33128, and 33170 and 33126. 2/Excludes receipts and shipments of steel processed on a conversion basis for nonsteel producing companies. Receipts data represent receipts at producing mills only and include receipts from domestic sources. 3/Import receipts of steel mill products for 1996 are as follows: total, 6,533,679 metric tons; carbon, 6,269,942 metric tons; alloy, 99,775 metric tons; stainless 163,962 metric tons. 4/Net shipments are derived by subtracting domestic receipts from total quantity shipments plus steel consumed in producing plants. 5/Product code 3312C -- combines product codes 3312C 11, 3312C 13, 3312C 15, 3312C 17, 3312C 19, 3312C 21, and 3312C 23. 6/Represents wire products produced within steel works and wire drawing establishments. See the 1992 Census of Manufactures', Tables 6A-1 and 6A-2 for detailed information. Note: Quantity data converted to metric tons, therefore the detail may not add to total due to rounding. Table 3B. Receipts, Consumption, Shipments, and Net Shipments of Steel Mill Products: 1995 (Quantity in metric tons. Value in thousands of dollars) Steel Total shipments consumed in Number Receipts producing Value Net Product of com- 2/ 3/ plants f.o.b. shipments 4/ code 1/ Product description panies (quantity) (quantity) Quantity plant (quantity) Steel. . . . . . . . . . . . (NA) 25,850,765 r/1,983,676 108,984,820 66,290,835 r/85,117,731 Carbon steel, total. . . . . . . . . 278 23,320,594 r/1,803,700 97,019,524 52,296,298 r/75,502,630 33122 11 Ingots. . . . . . . . . . . . . . 6 (D) (D) 202,757 75,397 r/ 291,040 Semifinished products: 33122 13 Blooms, billets, sheet bars, tin mill bars, tube rounds, and skelp. . . . . 34 (D) (D) r/ 2,288,543 r/ 773,978 (D) 33122 19 Wire rods. . . . . . . . . . . . 20 2,942,710 r/ 171,237 r/ 4,566,640 r/ 1,742,321 r/ 1,795,167 33122 20 Slabs. . . . . . . . . . . . . 12 761,187 r/ 2,701 r/ 1,211,679 r/ 343,714 r/ 453,193 Finished products: 33124 13 Plates, cut lengths. . . . . . . . . 16 (D) (D) r/ 4,031,181 r/ 1,971,925 3,853,996 33124 14 Plates, in coils. . . . . . . . . . 6 (D) (D) 361,144 162,348 r/ 319,431 Sheet: 33123 11 Hot rolled, including hot rolled bands. . 25 10,950,536 r/ 687,284 20,434,303 8,371,297 r/10,171,051 33167 11 Cold rolled. . . . . . . . . . . 26 r/ 1,336,915 r/ 276,307 13,179,248 7,011,007 12,118,640 Sheet and strip: Galvanized: 33123 13 Hot dipped. . . . . . . . . . 16 157,057 r/ 2,156 8,136,327 5,450,612 7,981,426 33123 15 Electrolytic. . . . . . . . . . 13 10,083 - 2,343,625 1,859,263 2,333,542 33123 17 Electrical. . . . . . . . . . . 3 (D) (D) (D) (D) (D) 33123 18 All other metallic coated, including long ternes. . . . . . . . . . 11 (D) (D) 1,040,847 785,738 1,031,232 Strip: 33123 19 Hot rolled. . . . . . . . . . . 18 (D) (D) r/ 2,281,036 r/ 962,214 r/ 1,748,798 33167 15 Cold rolled. . . . . . . . . . . 21 r/ 268,156 r/ 53,845 r/ 1,223,829 r/ 1,122,992 r/ 1,009,518 Tin mill products: 33123 24 Black plate. . . . . . . . . . . 9 (D) (D) 445,701 243,500 438,506 33123 26 Electrolytic and hot dipped tin plate. . 8 (D) (D) 2,552,170 1,755,614 2,553,480 33123 28 Tin free steel. . . . . . . . . . 5 (D) (D) 449,961 298,436 449,961 33123 29 All other tin mill products, including short ternes and foil. . . . . . . 2 - - (D) (D) (D) Structural shapes (heavy): 33124 15 Wide flange. . . . . . . . . . . 5 - - 2,904,656 1,182,913 2,904,656 33124 17 Standard heavy shapes. . . . . . . 10 (D) (D) 2,310,003 1,052,089 2,309,315 33124 18 Sheet piling and bearing piles. . . . . 4 - - (D) (D) (D) Bars: 33124 22 Hot rolled, except concrete reinforcing. 35 1,068,397 11,045 6,136,761 2,972,845 5,079,409 33124 24 Light structurals, under 3 inches. . . 9 (D) (D) 1,474,043 617,961 1,474,038 33124 26 Concrete reinforcing. . . . . . . . 19 (D) (D) 4,240,207 1,453,667 4,265,768 33168 11 Cold finished. . . . . . . . . . 36 (D) (D) r/ 1,437,608 1,204,428 r/ 1,376,943 3312C -- Rails, wheels, and track accessories 5/. . 10 (D) (D) 685,008 448,538 r/ 542,059 Pipe and tube: Line pipe: 33170 14 16 inches O.D. and under. . . . . . 23 (D) (D) 1,103,289 674,309 1,104,115 33170 15 Over 16" O.D. . . . . . . . . . 8 - - 475,252 335,550 475,252 33170 19 Oil country goods. . . . . . . . . 15 (D) (D) r/ 823,661 r/ 553,138 r/ 832,103 Pressure tubing: 33170 21 Seamless. . . . . . . . . . . 8 (D) (D) 50,883 71,425 44,236 33170 22 Welded. . . . . . . . . . . . 15 (D) (D) r/ 334,120 r/ 401,503 r/ 334,852 Mechanical tubing: 33170 23 Seamless. . . . . . . . . . . 13 (D) (D) 102,810 126,141 100,040 33170 24 Welded. . . . . . . . . . . . 57 64,156 r/ 48,143 2,037,988 2,069,591 2,021,975 33170 27 Structurals. . . . . . . . . . . 25 (D) (D) 1,136,065 739,041 1,133,126 33170 29 Miscellaneous, including stadard pipe. . 30 (D) (D) r/ 1,324,380 r/ 943,008 r/ 1,321,674 Wire: Plain wire: 33155 01 Flat wire. . . . . . . . . . . 8 (D) (D) 31,020 34,059 29,030 Round wire: Thermally treated: 33155 02 Under 1.5 mm in diameter. . . . 17 (D) (D) 55,519 65,083 r/ 5,065 33155 03 1.5 mm or above in diameter. . . 22 (D) (D) 220,545 186,238 r/ 163,605 Other round wire: 33155 04 Under 1.5 mm in diameter. . . . 12 (D) (D) 223,537 268,236 r/ 145,220 33155 05 1.5 mm or above in diameter. . . 36 r/ 201,449 r/ 7,349 r/ 1,251,882 r/ 700,809 r/ 1,057,782 33155 06 Other shape wire. . . . . . . . 10 (D) (D) 276,270 142,071 276,105 Plated or coated with zinc: Round wire: 33155 13 Under 1.5 mm in diameter. . . . . 12 (D) (D) 46,246 38,142 r/ 27,107 33155 14 1.5mm or above in diameter. . . . . 23 (D) (D) 300,276 207,134 r/ 227,177 33155 15 Other shape wire, including flat. . . 9 (D) (D) 82,284 60,800 63,547 Other coated wire: 33155 17 Flat wire. . . . . . . . . . . 2 (D) (D) (D) (D) (D) 33155 18 Round wire. . . . . . . . . . 18 (D) (D) 115,393 129,051 134,976 33155 21 Other shape wire. . . . . . . . 6 (D) (D) 51,340 r/ 62,874 51,272 Wire products: 6/ 33152 21 Nails and staples. . . . . . . . . 23 (D) (D) r/ 575,895 673,209 r/ 575,318 33159 51 Barbed and twisted wire. . . . . . . 8 (D) (D) 151,006 r/ 161,426 151,001 33156 21 Wire fence, woven and welded. . . . . 12 (D) (D) 415,634 287,976 415,103 33159 55 Bale ties. . . . . . . . . . . 7 - - 34,961 28,276 34,961 33151 13 Wire rope and cable. . . . . . . . 14 (D) (D) 173,467 352,002 173,349 Wire strand: 33151 33 For prestressed concrete. . . . . . 8 - - r/ 235,831 r/ 157,273 r/ 235,831 33151 35 Other. . . . . . . . . . . . 15 - - 227,145 270,740 227,145 33157 71 Woven wire netting. . . . . . . . 10 (D) (D) 97,721 90,652 96,464 Alloy Steel, total. . . . . . . . . . 82 1,521,916 r/ 160,835 9,366,621 7,087,363 r/ 8,005,540 33122 31 Ingots. . . . . . . . . . . . . . 12 19,778 r/ 107,210 301,870 187,480 389,302 Semifinished products: 33122 37 Blooms, billets, sheet bars, rounds, and skelp. . . . . . . . . . . . 18 (D) (D) 1,360,132 773,090 r/ 415,690 33122 39 Wire rods. . . . . . . . . . . . 4 (D) (D) (D) (D) (D) 33122 41 Slabs. . . . . . . . . . . . . 5 (D) (D) (D) (D) (D) Finished products: 33124 33 Plates, cut lengths. . . . . . . . 7 (D) (D) 639,189 445,660 639,218 33124 36 Plates, in coils. . . . . . . . . 3 (D) (D) (D) (D) (D) 33124 38 Structural shapes, 3 inches and under. . 4 - - (D) (D) (D) Sheet: 33123 31 Hot rolled. . . . . . . . . . 10 r/ 22,567 - 1,612,516 710,513 1,589,949 33167 31 Cold rolled. . . . . . . . . . 8 (D) (D) 317,959 r/ 177,815 316,487 Sheet and strip: Galvanized: 33123 35 Hot dipped. . . . . . . . . . 3 - - 123,382 92,036 123,382 33123 37 All other metallic coated, including electrolytic. . . . . . . . . . 6 (D) (D) (D) (D) (D) Strip: 33123 39 Hot rolled. . . . . . . . . . 4 (D) (D) 4,485 2,254 (D) 33167 35 Cold finished. . . . . . . . . 13 (D) (D) r/ 268,824 r/ 476,284 r/ 261,008 Bars: 33124 41 Hot rolled, including structural shapes under 3 inches. . . . . . . 17 (D) (D) 2,337,273 1,494,613 r/ 2,115,757 33168 31 Cold finished. . . . . . . . . . 24 73 - 469,719 r/ 506,989 469,647 Tool steel: 33124 48 High speed. . . . . . . . . . . 7 (D) (D) 13,609 125,277 10,493 33124 49 Other than high speed. . . . . . . 7 (D) (D) r/ 48,881 r/ 183,287 r/ 48,100 Pipe and tube: 33170 32 Oil country goods and line pipe. . . . 8 (D) (D) 988,293 729,498 940,476 33170 43 Pressure tubing. . . . . . . . . 7 (D) (D) 10,369 33,943 10,156 33170 45 Mechanical tubing. . . . . . . . 11 (D) (D) 501,219 681,935 399,408 33170 48 Miscellaneous, including standard and structural. . . . . . . . . . 5 (D) (D) (D) (D) (D) 33155 37 Wire, plain and coated. . . . . . . 14 3,991 - 59,995 r/ 124,402 56,005 Stainless steel, total. . . . . . . . 83 r/ 1,008,255 r/ 19,141 2,598,675 6,907,174 r/ 1,609,560 33122 51 Ingots. . . . . . . . . . . . . . 12 (D) (D) 27,584 39,137 (D) Semifinished products: 33122 56 Blooms, billets, slabs, sheet bars, tube rounds, and skelp. . . . . . . 15 (D) (D) r/ 268,171 r/ 438,681 118,532 33122 59 Wire rods. . . . . . . . . . . . 4 (D) (D) r/ 37,945 r/ 116,046 r/ 25,693 Finished products: 33124 53 Plates and structurals. . . . . . . 7 9,371 - 201,707 668,895 192,337 Sheet and strip: 33123 57 Hot rolled. . . . . . . . . . . 5 655,635 r/ - 612,401 1,062,945 (D) 33167 57 Cold rolled. . . . . . . . . . . 15 (D) (D) r/ 1,044,319 r/ 2,558,380 r/ 954,392 Bars: 33124 61 Hot rolled. . . . . . . . . . . 7 (D) (D) r/ 65,095 r/ 217,903 40,692 33168 51 Cold finished. . . . . . . . . . 14 (D) (D) 129,583 r/ 600,661 128,224 Pipe and tube: Pressure tubing: 33170 61 Seamless. . . . . . . . . . . 8 - - r/ 9,293 r/ 91,379 r/ 9,293 33170 62 Welded. . . . . . . . . . . 12 - - 66,191 361,501 66,191 Mechanical tubing: 33170 63 Seamless. . . . . . . . . . . 5 (D) (D) (D) (D) (D) 33170 64 Welded. . . . . . . . . . . 17 (D) (D) 68,300 372,203 68,199 33170 65 Other pipe and tube. . . . . . . . 6 (D) (D) 3,599 22,553 3,621 Wire: Round wire: 33155 52 Under 0.75 mm in diameter. . . . . 11 (D) (D) r/ 11,054 r/ 71,919 10,483 33155 53 0.75 mm to under 1.5 mm in diameter. . 11 121 r/ - 4,617 r/ 28,235 4,496 33155 54 1.5 mm and above in diameter. . . . 14 (D) (D) r/ 34,133 r/ 141,642 r/ 33,345 33155 57 Other shape wire, including flat wire. . 11 (D) (D) (D) (D) (D) - Represents zero. D Data withheld to avoid disclosing data for individual companies. In some cases, data that are otherwise publishable are withheld to avoid disclosing by subtraction from higher-level totals or from related data. r/Revised by 5 percent or more from previously published data. 1/Product codes in the 33155 series also include products in the 33125 series, the same applies for 33167 and 33127, 33168 and 33128, and 33170 and 33126. 2/Excludes receipts and shipments of steel processed on a conversion basis for nonsteel producing companies. Receipts data represent receipts at producing mills only and include receipts from domestic sources. 3/Import receipts of steel mill products for 1995 are as follows: total, 4,790,265 metric tons; carbon, 4,464,565 metric tons; alloy, 174,284 metric tons; stainless 151,416 metric tons. 4/Net shipments are derived from subtracting domestic receipts from total quantity shipments plus steel consumed in producing plants. 5/Product code 3312C -- combines product codes 3312C 11, 3312C 13, 3312C 15, 3312C 17, 3312C 19, 3312C 21, and 3312C 23. 6/Represents wire products produced within steel works and wire drawing establishments. See the 1992 Census of Manufactures', Tables 6A-1 and 6A-2 for detailed information. Note: Quantity data converted to metric tons, therefore the detail may not add to total due to rounding. Table 4. MINI-MILL SHIPMENTS OF SELECTED STEEL MILL PRODUCTS: 1996 AND 1995 (Quantity in metric tons) 1996 1995 No. of Percent No. of Percent Product description mini- Mini- of mini- mini- Mini- of mini- Product mill Industry mills mills to mill Industry mills mills to code 1/ comp. total total total comp. total total total Carbon steel, total 2/. . . . . . 26 44,898,826 15,915,393 35.4 20 43,710,120 r/12,945,042 29.6 33122 11 Ingots. . . . . . . . . . 2 136,292 (D) (D) 3 202,757 (D) (D) Semifinished products: 33122 13 Blooms, billets, slabs, sheet 33122 20 bars, tin mill bars, tube rounds, and skelp. . . . . . . . . 18 3,402,311 1,229,657 36.1 13 r/3,500,222 1,073,217 30.7 33122 19 Wire rods. . . . . . . . . 4 4,918,313 1,841,003 37.4 2 r/4,566,640 (D) (D) Finished products: 33124 13 Plates-all lengths. . . . . . 4 4,440,800 862,069 19.4 4 r/4,392,325 782,435 17.8 33124 14 33123 19 Hot rolled strip. . . . . . 4 2,438,527 (D) (D) 4 r/2,281,036 (D) (D) Structural shapes (heavy): 33124 15 Wide flange. . . . . . . 3 (D) 1,012,505 (D) 3 2,904,656 1,040,745 35.8 33124 17 Standard heavy shapes. . . . 6 2,256,898 1,902,771 84.3 5 2,310,003 r/1,785,635 77.3 33124 18 Sheet piling and bearing piles. . 1 (D) (D) (D) 1 (D) (D) (D) Bars: 33124 22 Hot rolled, except concrete reinforcing. . . . . . . . . . 15 6,132,372 3,513,980 57.3 11 6,136,761 r/2,965,681 48.3 33124 24 Light structurals (under 3"). . 7 1,355,087 979,213 72.3 5 1,474,043 r/798,746 54.2 33124 26 Concrete reinforcing. . . . 11 4,927,159 3,417,684 69.4 8 4,240,207 r/2,475,044 58.4 33168 11 Cold finished. . . . . . . 1 1,320,589 (D) (D) 1 r/1,437,608 (D) (D) 3312C -- Rails, wheels, and track accessories 3/. . . . . . . . . . 2 732,572 (D) (D) 1 685,008 (D) (D) Pipe and tube: 33170 14 Line pipe, 16 inches O.D. and under. . . . . . . . . . . 2 1,114,575 (D) (D) 2 1,103,289 (D) (D) 33170 19 Oil country goods. . . . . 2 1,197,158 (D) (D) 2 r/823,661 (D) (D) 33170 23 Mechanical tubing, seamless. . 1 106,265 (D) (D) 1 102,810 (D) (D) 33170 27 Structurals. . . . . . . 2 1,238,952 (D) (D) 2 1,136,065 (D) (D) 33170 29 Miscellaneous, including standard pipe. . . . . . . . . 2 1,472,925 (D) (D) 2 r/1,324,380 (D) (D) 33155 00 Wire 4/. . . . . . . . . 2 (D) (D) (D) 2 (D) (D) (D) 3315- 00 Wire products 5/. . . . . . 1 1,946,131 (D) (D) 1 1,911,660 (D) (D) D Withheld to avoid disclosing data for individual companies. r/ Revised by 5 percent or more from previously published data. 1/ Product codes in the 33155 series also include products in the 33125 series, the same applies for the 33167 and 33127, 33168 and 33128, and 33170 and 33126. 2/ The total data is for selected product codes only. 3/ Product code 3312C-- combines product codes 3312C 11, 3312C 13, 3312C 15, 3312C 17, 3312C 19, 3312C 21, and 3312C 23. 4/ Product code 33155 00 combines product codes 33155 01 through 33155 21. 5/ Product code 3315- 00 combines product codes 33152 21, 33159 51, 33156 21, 33159 55, 33151 13, 33151 33, 33151 35, and 33157 71. Note: Quantity data converted to metric tons, therefore the detail may not add to the total due to rounding. Table 5. NET SHIPMENTS, EXPORTS, IMPORTS AND APPARENT CONSUMPTION OF STEEL MILL PRODUCTS: 1996 (Quantity in metric tons. Value in thousadns of dollars) Manufacturers' Export of domestic Imports for Apparent shipments merchandise 1/ 2/ consumption 1/ 3/ consumption 4/ Product description Total Net value Product (quan- f.o.b. Value Value code 1/ tity) 5/ plant Quantity at port Quantity c.i.f. 6/ Quantity Value Total . . . . . . . . . 87,473,349 65,990,081 3,122,982 3,103,926 14,448,640 232,110,566 98,799,007 294,996,721 33122 11 Carbon steel ingots. . . . . . . 262,690 59,192 60,996 29,898 31,008 249,322 232,702 278,616 33122 13 Carbon steel, semifinished 33122 20 blooms, billets, sheet bars, tin mill bars, tube rounds, skelp, and slabs. . . . . . . . (D) 1,068,757 166,099 69,060 6,591,295 55,102,445 (D) 56,102,142 33122 19 Carbon steel, semifinished wire rods. . . . . . . . . . . . 2,126,154 1,823,737 - - - - 2,126,154 1,823,737 33124 13 Carbon steel, finished plates, 33124 14 both cut in lengths and in coils. . 4,201,460 2,126,762 - - - - 4,201,460 2,126,762 33123 11 Carbon steel, finished sheet and 33123 19 strip, hot rolled, including hot rolled bands. . . . . . . . . . 10,679,487 8,797,034 49,985 41,382 77,779 977,338 10,707,281 9,732,990 33167 11 Carbon steel, finished sheet, cold rolled. . . . . . . . . . . . 13,377,429 7,315,037 418,916 248,637 26,623 507,634 12,985,136 7,574,034 33123 13 Carbon steel, finished sheet and strip, galvanized, hot dipped. . . 8,482,159 5,554,131 91,328 69,947 1,032,293 23,215,067 9,423,124 28,699,251 33123 15 Carbon steel, finished sheet and strip, galvanized, electrolytic. . . 2,750,604 2,043,669 136,558 100,188 - - 2,614,046 1,943,481 33123 17 Carbon steel, finished sheet and 33123 18 strip, electrical and other metallic coating, including long ternes. . . (D) (D) 134,593 142,625 224,568 7,548,491 (D) (D) 33167 15 Carbon steel, finished strip, cold rolled. . . . . . . . . . . . . . 1,052,166 1,088,073 25,586 30,103 9,143 781,958 1,035,723 1,839,928 33123 24 Carbon steel, finished tin mill, black plate. . . . . . . . . . . . 499,607 278,280 5,343 2,364 - - 494,263 275,916 33123 26 Carbon steel, finished tin mill, electrolytic and hot dipped tin plate. 2,695,582 1,813,166 323,706 199,474 250,380 4,304,122 2,622,256 5,917,814 33123 28 Carbon steel, finished tin mill, tin 33123 29 free steel and other tin mill products, including short ternes and foil. . . . . . . . . . . . (D) (D) (NA) (NA) (NA) (NA) (D) (D) 33124 15 Carbon steel, finished structural 33124 17 shapes (heavy), both wide flange and standard heavy shapes. . . . . . (D) (D) 211,579 103,576 815,317 2,032,813 (D) (D) 33124 18 Carbon steel, finished sheet piling and bearing piles. . . . . . . (D) (D) 30,619 25,170 62,280 195,965 (D) (D) 33124 22 Carbon steel, finished bars, hot rolled (except concrete reinforcing) . . . 5,160,579 2,837,299 - - 142,035 1,608,625 5,302,614 4,445,924 33124 24 Carbon steel, finished bars, light structurals, under 3 inches. . . . 1,354,906 533,829 105,037 64,917 125,640 180,072 1,375,509 648,984 33124 26 Carbon steel, finished bars, concrete reinforcing. . . . . . . . . 4,953,890 1,633,623 - - 528,940 5,408,410 5,482,830 7,042,033 33168 11 Carbon steel, finished bars, cold finished. . . . . . . . . . . . . . 1,256,076 1,094,874 - - 80,692 2,464,282 1,336,768 3,559,156 3312C -- Carbon steel, finished rails, wheels, and track accessories 7/. . . . . 642,679 478,705 60,975 37,228 180,013 305,023 761,716 746,500 33170 14 Carbon steel, finished line pipe, all 33170 15 diameters. . . . . . . . . . 1,594,087 974,800 162,506 155,330 539,662 9,632,386 1,971,243 10,451,856 33170 19 Carbon steel, finished pipe and tubes, oil country goods. . . . . . . 1,205,600 801,528 156,119 173,650 53,979 290,949 1,103,460 918,827 33170 27 Carbon steel, finished pipe and tubes, structurals. . . . . . . . . 1,235,324 760,877 51,065 56,791 461,792 2,811,081 1,646,050 3,515,167 33170 21 Carbon steel, finished pipe and tubes 33170 22 (except line pipe, oil country goods, 33170 23 and structurals) . . . . . . . . . . 4,014,084 3,625,785 95,713 140,651 823,872 12,984,146 4,742,243 16,469,280 33170 24 33170 29 33155 01 Carbon steel, finished plain wire. . 1,573,043 1,323,764 34,333 35,353 - - 1,538,710 1,288,411 33155 02 33155 03 33155 04 33155 05 33155 06 33155 13 Carbon steel, finished wire, plated 33155 14 or coated with zinc. . . . . . . . 279,823 286,924 10,298 14,900 - - 269,525 272,024 33155 15 33155 17 Carbon steel, finished wire, plated 33155 18 or coated, other than with zinc. . . . (D) (D) 14,610 25,207 - - (D) (D) 33155 21 33152 21 Carbon steel, finished wire nails and staples. . . . . . . . . . . . . 601,746 724,978 16,164 41,249 351,439 1,432,703 937,022 2,116,432 33159 51 Carbon steel, finished barbed and twisted wire. . . . . . . . . . . . 154,830 166,757 2,364 3,805 12,948 9,893 165,413 172,845 33156 21 Carbon steel, finished wire fence 33157 71 (woven and welded) and woven wire netting. . . . . . . . . . . . 519,060 376,729 7,576 12,910 47,657 339,606 559,142 703,425 33159 55 Carbon steel, finished wire bale ties. . . . . . . . . . . . . . 31,811 25,812 (NA) (NA) (NA) (NA) 31,811 25,812 33151 13 Carbon steel, finished wire rope and cable. . . . . . . . . . . . . 170,104 345,662 11,212 32,606 83,505 4,384,471 242,397 4,697,527 33151 33 Carbon steel, finished wire strand for prestressed concrete. . . . . 242,722 160,818 4,455 4,358 47,637 934,706 285,904 1,091,166 33151 35 Carbon steel, finished wire strand (except for prestressed concrete) . 222,008 259,598 (NA) (NA) (NA) (NA) 222,008 259,598 33122 31 Alloy steel (except stainless, ingots) . . . . . . . . . . . . 398,254 205,045 27,482 28,801 10,376 293,893 381,148 470,137 33122 37 Alloy steel (except stainless, semi- 33122 41 finished blooms, billets, sheet bars, tube rounds, skelp, and slabs) . . (D) (D) 15,312 33,279 114,117 1,967,995 (D) (D) 33124 33 Alloy steel (except stainless, finished 33124 36 plate, sheet or strip, both hot and 33123 31 cold rolled or cold finished) . . . . (D) (D) 93,659 90,142 487,218 11,990,915 (D) (D) 33167 31 33123 35 33123 37 33123 39 33167 35 33122 39 Alloy steel (except stainless, semi- 33124 38 finished wire rods, finished struc- 33124 41 tural shapes, 3 inches and under) 33168 31 and bars, hot rolled, including structural shapes under 3 inches and cold finished. . . . . . . (D) (D) 212,053 196,619 732,739 12,066,053 (D) (D) 33124 48 Alloy steel (except stainless, finished tool steel, high speed) . . 11,404 112,385 1,286 11,813 1,871 1,172,943 11,989 1,273,515 33124 49 Alloy steel (except stainless, finished tool steel, except high speed) . . . . . . . . . . 46,259 180,804 5,649 18,010 40,017 3,927,042 80,627 4,089,836 33170 32 Alloy steel (except stainless, finished oil country goods and line pipe) . . . . . . . . . . . 864,687 774,572 152,747 210,175 17,695 1,235,800 729,635 1,800,197 33170 43 Alloy steel, including stainless, 33170 45 pipe and tubes, n.e.c. . . . . . . . . 756,009 1,713,063 104,286 283,758 136,545 15,838,544 788,268 17,267,849 33170 48 33170 63 33170 64 33170 65 33170 61 33170 62 33155 37 Alloy steel (except stainless, finished wire, plain or coated) . . 47,451 126,540 18,245 47,174 48,416 4,651,838 77,623 4,731,204 33122 51 Stainless steel Ingots. . . . . . (D) 32,508 7,085 23,839 9,106 352,065 (D) 360,734 33122 56 Stainless steel, semifinished blooms, billets, slabs, sheet bars, tube rounds, and skelp. . . . . . . 97,758 399,760 - - - - 97,758 399,760 33122 59 Stainless steel, semifinished wire 33124 61 rods and finished bars, hot rolled. . 60,232 305,972 - - 58,965 5,665,877 119,197 5,971,849 33124 53 Stainless steel, finished plates and structurals. . . . . . . . . . . . . 160,336 520,475 24,697 82,755 84,080 11,287,921 219,719 11,725,641 33123 57 Stainless steel, finished sheet and strip, hot rolled. . . . . . . (D) 873,621 8,044 25,014 22,134 3,236,501 (D) 4,085,108 33167 57 Stainless steel, finished sheet and strip, cold rolled. . . . . . . 894,981 65,871 59,628 160,230 9,361 1,525,921 844,714 1,431,562 33168 51 Stainless steel, finished bars, cold finished. . . . . . . . . . . 122,795 611,872 - - 50,656 11,857,401 173,450 12,469,273 33155 52 Stainless steel, finished wire. . . (D) (D) 5,071 30,938 24,844 7,338,349 (D) (D) 33155 53 33155 54 33155 57 NA Not applicable. D Withheld to avoid disclosing data for individual companies. 1/ For a comparison of SIC-based product codes with Schedule B export numbers and HTSUSA import numbers, see table 6. 2/ Source: Bureau of the Census report EM 545, U.S. EXPORTS. 3/ Source: Bureau of the Census report IM 145, U.S. IMPORTS FOR CONSUMPTION. 4/ Apparent consumption is derived by subtracting exports from the total manufacturers' shipments plus imports. 5/ Includes quantities of steel consumed in steel producing plants in the manufacture of fabricated products and maintenance, repair, and operating supplies (MRO) while excluding receipts. Refer to Table 3A for the net shipments detail. 6/ This dollar value represents the c.i.f. (cost , insurance, and freight) value at the first port of entry in the United States plus U.S. import duties. 7/ For manufactures' shipments, product code 3312C -- combines product codes 3312C 11, 3312C 13, 3312C 15, 3312C 17, 3312C 19, 3312C 21, and 3312C 23; for exports and imports, product code 3312C -- combines product codes 3312C 11, 3312C 13, 3312C 15, and 3312C 17, product codes 3312C 19, 3312C 21, and 3312C 23 are not applicable (NA). Refer to Table 6 for details. Note: Quantity data converted to metric tons, therefore the detail may not add to total due to rounding. MA33B - 1996 Table 6. COMPARISON OF STANDARD INDUSTRIAL CLASSIFICATION-BASED PRODUCT CODES WITH SCHEDULE B EXPORT NUMBERS, AND HTSUSA IMPORT NUMBERS: 1996 Product Export Import code Product description number 1/ number 2/ 33122 11 Carbon steel ingots. . . . . . . . . . . . . . 7206.10.0000 7206.10.0000 7206.90.0000 7206.90.0000 33122 13 Carbon steel, semifinished 33122 20 blooms, billets, sheet bars, tin mill bars, tube rounds, skelp, and slabs. . . . . . . . . . . . . . 7207.11.0000 7207.11.0000 7207.12.0000 7207.12.0010 7207.19.0000 7207.12.0050 7207.20.0000 7207.19.0030 7207.19.0090 7207.20.0025 7207.20.0045 7207.20.0075 7207.20.0090 33122 19 Carbon steel, semifinished wire rods. . . . . 7213.31.0000 7213.31.3000 7213.41.0000 7213.31.6000 7213.41.3000 7213.41.6000 7213.50.0020 33124 13 Carbon steel, finished plates, both 33124 14 cut in lengths and in coils. . . . . . . . 7208.11.0000 7208.11.0000 7208.12.0000 7208.12.0000 7208.21.0000 7208.21.1000 7208.22.0000 7208.21.5000 7208.31.0000 7208.22.1000 7208.32.0000 7208.22.5000 7208.33.0000 7208.31.0000 7208.41.0000 7208.32.0000 7208.42.0000 7208.33.1000 7208.43.0000 7208.33.5000 7211.11.0000 7208.41.0000 7211.12.0000 7208.42.0000 7211.21.0000 7208.43.0000 7211.22.0000 7211.11.0000 7211.12.0000 7211.21.0000 7211.22.0045 7211.22.0090 33123 11 Carbon steel, finished sheet and 33123 19 strip, hot rolled, including hot rolled bands. . . . . . . . . . . . . . . 7208.13.0000 7208.13.1000 7208.14.0000 7208.13.5000 7208.23.0000 7208.14.1000 7208.24.0000 7208.14.5000 7208.34.0000 7208.23.1000 7208.35.0000 7208.23.5030 7208.44.0000 7208.23.5090 7208.45.0000 7208.24.1000 7208.90.0000 7208.24.5030 7210.70.0000 7208.24.5090 7211.19.0000 7208.34.1000 7211.29.0000 7208.34.5000 7208.35.1000 7208.35.5000 7208.44.0000 7208.45.0000 7208.90.0000 7210.70.3000 7211.19.1000 7211.19.5000 7211.29.1000 7211.29.3000 7211.29.5000 7211.29.7030 7211.29.7060 7211.29.7090 33167 11 Carbon steel, finished sheet, cold rolled. . . 7209.11.0000 7209.11.0000 7209.12.0000 7209.12.0030 7209.13.0000 7209.12.0090 7209.14.0000 7209.13.0030 7209.15.0010 7209.13.0090 7209.15.0050 7209.14.0030 7209.16.0010 7209.14.0090 7209.16.0050 7209.21.0000 7209.17.0010 7209.22.0000 7209.17.0050 7209.23.0000 7209.18.1500 7209.24.5000 7209.18.6000 7209.31.0000 7209.21.0000 7209.32.0000 7209.22.0000 7209.33.0000 7209.23.0000 7209.34.0000 7209.24.5000 7209.41.0000 7209.25.0010 7209.42.0000 7209.25.0050 7209.43.0000 7209.26.0010 7209.44.0000 7209.26.0050 7209.90.0000 7209.27.0010 7209.27.0050 7209.28.0010 7209.28.0050 7209.31.0000 7209.32.0000 7209.33.0000 7209.34.0000 7209.41.0000 7209.42.0000 7209.43.0000 7209.44.0000 7209.90.0000 33123 13 Carbon steel, finished sheet and strip, galvanized, hot dipped. . . . . . . . . . 7210.41.0000 7210.41.0000 7210.49.0000 7210.49.0030 7212.30.0000 7210.49.0090 7212.30.1030 7212.30.1090 7212.30.3000 7212.30.5000 33123 15 Carbon steel, finished sheet and strip, galvanized, electrolytic. . . . . . . . . 7210.30.0010 7210.31.0000 7210.30.0090 7210.39.0000 7210.31.0000 7212.21.0000 7210.39.0000 7212.29.0000 7212.20.1000 7212.20.5000 7212.21.0000 7212.29.0000 33123 17 Carbon steel, finished sheet and strip, 33123 18 electrical and other metallic coating including long ternes. . . . . . . . . . 7210.20.0000 7210.20.0000 7210.50.0000 7210.60.0000 7210.60.0000 7210.70.6030 7210.70.0000 7210.70.6060 7210.90.1000 7210.70.6090 7210.90.5000 7210.90.1000 7212.40.0000 7210.90.6000 7212.50.0000 7210.90.9000 7212.60.0000 7212.40.1000 7212.40.5000 7212.50.0000 7212.60.0000 33167 15 Carbon steel, finished strip, cold rolled. . . 7211.30.0000 7211.30.1030 7211.41.0000 7211.30.1090 7211.49.0000 7211.30.3000 7211.90.0000 7211.30.5000 7211.41.1000 7211.41.3030 7211.41.3090 7211.41.5000 7211.41.7030 7211.41.7060 7211.41.7090 7211.49.1030 7211.49.1090 7211.49.3000 7211.49.5030 7211.49.5060 7211.49.5090 7211.90.0000 33123 24 Carbon steel, finished tin mill, black plate. . . . . . . . . . . . . 7209.18.2500 7209.24.1000 7209.24.1000 33123 26 Carbon steel, finished tin mill, electrolytic and hot dipped tin plate. . . . 7210.11.0000 7210.11.0000 7210.12.0000 7210.12.0000 7212.10.0000 7212.10.0000 33123 28 Carbon steel, finished tin mill, tin 33123 29 free steel and other tin mill products, including short ternes and foil. . . . . . (NA) (NA) 33124 15 Carbon steel, finished structural 33124 17 shapes (heavy), both wide flange and standard heavy shapes. . . . . . . . . . 7216.31.0000 7216.31.0000 7216.32.0000 7216.32.0000 7216.33.0000 7216.33.0030 7216.40.0000 7216.33.0060 7216.50.0000 7216.33.0090 7216.60.0000 7216.40.0010 7216.90.0000 7216.40.0050 7216.50.0000 7216.60.0000 7216.90.0000 33124 18 Carbon steel, finished sheet piling and bearing piles. . . . . . . . . 7301.10.0000 7301.10.0000 33124 22 Carbon steel, finished bars, hot rolled (except concrete reinforcing) . . . . . . . 7213.20.0000 7213.20.0000 7213.39.0000 7213.39.0030 7213.49.0000 7213.39.0060 7213.50.0000 7213.39.0090 7214.10.0000 7213.49.0030 7214.30.0000 7213.49.0060 7214.40.0000 7213.49.0090 7314.50.0000 7213.50.0040 7214.60.0000 7213.50.0060 7215.90.0000 7213.50.0080 7214.10.0000 7214.30.0000 7214.40.0010 7214.40.0030 7214.40.0050 7214.50.0010 7214.50.0030 7214.50.0050 7214.60.0010 7214.60.0030 7214.60.0050 7215.90.1000 33124 24 Carbon steel, finished bars, light structurals, under 3 inches. . . . . . . . 7216.10.0000 7216.10.0010 7216.21.0000 7216.10.0050 7216.22.0000 7216.21.0000 7216.22.0000 33124 26 Carbon steel, finished bars, 7213.10.0000 7213.10.0000 concrete reinforcing. . . . . . . . . . 7214.20.0000 7214.20.0000 33168 11 Carbon steel, finished bars, cold finished. . . . . . . . . . . . . . . . . . 7215.10.0000 7215.10.0000 7215.20.0000 7215.20.0000 7215.30.0000 7215.30.0000 7215.40.0000 7215.40.0000 7215.90.0000 7215.90.3000 7215.90.5000 3312C 11 Carbon steel, finished rails, standard tee, over 60 lbs per yard. . . . . . . . 7302.10.1020 7302.10.1010 7302.10.1035 3312C 13 Carbon steel, finished rails, n.e.c., including light (60 lbs per yard and under). . . . . . . . 7302.10.1030 7302.10.1015 7302.10.1025 7302.10.1045 7302.10.1055 3312C 15 Carbon steel, finished rails, joint bars 3312C 17 and tie plates. . . . . . . . . . . . . . . . . . 7302.40.0000 7302.40.0000 3312C 19 Carbon steel, finished wheels (rolled and 3312C 21 forged), axles (rolled and forged), 3312C 23 and track spikes. . . . . . . . . . . (NA) (NA) 33170 14 Carbon steel, finished line pipe, all 33170 15 diameters. . . . . . . . . . . . . . . . . . . . 7304.10.1020 7304.10.1020 7304.10.1050 7304.10.1030 7304.10.1080 7304.10.1045 7305.11.1000 7304.10.1060 7305.12.1000 7304.10.1080 7305.19.1000 7305.11.1030 7306.10.1000 7305.11.1060 7305.12.1030 7305.12.1060 7305.19.1030 7305.19.1060 7306.10.1010 7306.10.1050 33170 19 Carbon steel, finished pipe and tubes, oil country goods. . . . . . . . . . . . . . . . 7304.20.1500 7304.20.1010 7304.20.5000 7304.20.1020 7304.20.7000 7304.20.1030 7304.21.3000 7304.20.1040 7304.29.1050 7304.20.1050 7304.29.5000 7304.20.1060 7305.20.3000 7304.20.1080 7306.20.1500 7304.20.2010 7306.20.6000 7304.20.2020 7304.20.2030 7304.20.2040 7304.20.2050 7304.20.2060 7304.20.2080 7304.20.5015 7304.20.5030 7304.20.5045 7304.20.5060 7304.20.5075 7304.20.7000 7305.20.2000 7305.20.4000 7306.20.1030 7306.20.1090 7306.20.2000 7306.20.6010 7306.20.6050 33170 27 Carbon steel, finished pipe and tubes, structurals. . . . . . . . . . . . . . . . . . . 7304.90.4000 7304.90.1000 7305.90.1000 7304.90.5000 7306.60.2500 7305.90.1000 7306.90.1000 7306.60.1000 7306.60.5000 7306.90.1000 33170 21 Carbon steel, finished pipe and tubes (except 33170 22 line pipe, oil country goods, and 33170 23 structurals). . . . . . . . . . . . . . 7304.31.0000 7304.31.6010 33170 24 7304.39.0000 7304.31.6050 33170 29 7305.31.4000 7304.39.0002 7305.39.1000 7304.39.0004 7306.30.1000 7304.39.0006 7306.30.1500 7304.39.0008 7304.39.0016 7304.39.0020 7304.39.0024 7304.39.0028 7304.39.0032 7304.39.0036 7304.39.0040 7304.39.0044 7304.39.0048 7304.39.0052 7304.39.0056 7304.39.0062 7304.39.0068 7304.39.0072 7304.39.0076 7304.39.0080 7305.31.4000 7305.39.1000 7306.30.1000 7306.30.5010 7306.30.5015 7306.30.5020 7306.30.5025 7306.30.5028 7306.30.5032 7306.30.5035 7306.30.5040 7306.30.5055 7306.30.5085 7306.30.5090 33155 01 Carbon steel, finished plain, flat wire. . . . . (NA) 7217.11.1000 7217.11.2000 7217.11.3000 7217.21.1000 7217.31.1000 33155 02 Carbon steel, finished plain, round wire, thermally treated, under 1.5 mm in in diameter. . . . . . . . . . . . . . (NA) 7217.11.5020 7217.11.5040 7217.21.3015 7217.21.3030 7217.31.3015 7217.31.3030 33155 03 Carbon steel, finished plain, round wire, thermally treated, 1.5 mm or above in diameter. . . . . . . . . . . . . . (NA) 7217.11.7030 7217.21.3045 7217.31.3045 33155 04 Carbon steel, finished plain, round wire, other than thermally treated, under 1.5 mm in diameter. . . . . . . . . . . . (NA) 7217.11.5060 7217.11.5080 7217.21.3060 7217.21.3075 7217.31.3060 7217.31.3075 33155 05 Carbon steel, finished plain, round wire, other than thermally treated, 1.5 mm or above in diameter. . . . . . . . . . . (NA) 7217.11.7090 7217.21.3090 7217.31.3090 33155 06 Carbon steel, finished plain wire, n.e.c., including. . . . . . . . . . . . . . . . . . . . (NA) 7217.11.9000 7217.21.5000 7217.31.5000 33155 01 Carbon steel, finished plain wire. . . . . . . 7217.10.1510 (NA) 33155 02 7217.10.2510 33155 03 7217.10.7510 33155 04 7217.11.0000 33155 05 7217.21.0000 33155 06 7217.31.0000 33155 13 Carbon steel, finished round wire, plated or coated with zinc, under 1.5 mm in diameter. . . . . . . . . . . . . . (NA) 7217.12.3030 7217.12.3060 7217.22.1015 7217.22.1030 7217.32.1015 7217.32.1030 33155 14 Carbon steel, finished round wire, plated or coated with zinc, 1.5 mm or above in diameter. . . . . . . . . . . . . . (NA) 7217.12.5000 7217.22.1050 7217.32.1050 33155 15 Carbon steel, finished wire shapes (except round, plated or coated with zinc, including flat. . . . . . . . . . . . . (NA) 7217.12.1000 7217.12.7000 7217.22.5000 7217.32.5000 33155 13 Carbon steel, finished wire, plated or 33155 14 coated with zinc. . . . . . . . . . . . . . . . 7217.12.0000 (NA) 33155 15 7217.20.1010 7217.20.5010 7217.20.9010 7217.22.0000 7217.32.0000 33155 17 Carbon steel, finished wire, plated 33155 18 or coated, other. . . . . . . . . . . . . . . . 7217.13.0000 7217.13.1000 33155 21 7217.19.0000 7217.13.3030 7217.23.0000 7217.13.5000 7217.29.0000 7217.13.7000 7217.30.1010 7217.19.1000 7217.30.5010 7217.19.5000 7217.30.9010 7217.23.1015 7217.33.0000 7217.23.1030 7217.39.0000 7217.23.1050 7217.23.5000 7217.29.1000 7217.29.5000 7217.33.1015 7217.33.1030 7217.33.1050 7217.33.5000 7217.39.1000 7217.39.5000 7247.13.3060 33152 21 Carbon steel, finished wire nails and staples. . . . . . . . . . . . . . . . . . . 7317.00.9000 7317.00.5505 7317.00.5510 7317.00.5520 7317.00.5530 7317.00.5540 7317.00.5550 7317.00.5560 7317.00.5570 7317.00.5580 7317.00.5590 7317.00.6530 7317.00.6560 7317.00.7500 33159 51 Carbon steel, finished barbed and twisted wire. . . . . . . . . . . . . . . . . . . . . . 7313.00.0000 7313.00.0000 33156 21 Carbon steel, finished wire fence (woven 33157 71 and welded) and woven wire netting . . . . . . . 7314.20.0000 7314.20.0000 7314.30.0000 7314.30.1000 7314.41.0000 7314.30.5000 7314.42.0000 7314.41.0030 7314.49.0000 7314.41.0060 7314.42.0030 7314.42.0060 7314.49.3000 7314.49.6000 33159 55 Carbon steel, finished wire bale ties. . . . . (NA) (NA) 33151 13 Carbon steel, finished wire rope and cable. . . . . . . . . . . . . . . . . . . . . . 7312.10.8500 7312.10.7000 7312.10.8000 7312.10.9030 7312.10.9060 7312.10.9090 33151 33 Carbon steel, finished wire strand for prestressed concrete. . . . . . . . . . . 7312.10.3015 7312.10.3010 7312.10.3012 33151 35 Carbon steel, finished wire strand (except for prestressed concrete). . . . (NA) (NA) 33122 31 Alloy steel, except stainless, ingots. . 7224.10.0000 7224.10.0005 7224.10.0045 7224.10.0075 33122 37 Alloy steel, except stainless, 33122 41 semifinished blooms, billets, sheet bars, tube rounds, skelp and slabs. . rounds, skelp and slabs. . . . . . 7224.90.0000 7224.90.0005 7224.90.0015 7224.90.0025 7224.90.0035 7224.90.0045 7224.90.0055 7224.90.0065 7224.90.0075 33124 33 Alloy steel, except stainless, finished 33124 36 plates, both cut in lengths and in coils. (NA) 7225.30.1000 7225.30.3005 7225.30.3050 7225.40.1015 7225.40.1090 7225.40.3005 7225.40.3050 7225.50.6000 7226.91.5000 33123 31 Alloy steel (except stainless, finished 33167 31 sheet and strip, hot and cold rolled, 32123 35 galvanized, hot-dipped and other 33123 37 metallic coated, including electrolytic). . . . . . . . . . (NA) 7225.10.0000 7225.20.0000 7225.30.5030 7225.30.5060 7225.30.7000 7225.40.5030 7225.40.5060 7225.40.5070 7225.50.1030 7225.50.1060 7225.50.7000 7225.50.8000 7225.90.0000 33123 39 Alloy steel (except stainless, finished 33167 35 strip, hot rolled or cold finished) . . . . (NA) 7226.10.1000 7226.10.5030 7226.10.5060 7226.20.0000 7226.91.0500 7226.91.1530 7226.91.1560 7226.91.2530 7226.91.2560 7226.91.7000 7226.91.8000 7226.92.1030 7226.92.1060 7226.92.3030 7226.92.3060 7226.92.5000 7226.92.7005 7226.92.7050 7226.92.8005 7226.92.8050 7226.99.0000 33124 33 Alloy steel (except stainless, finished 33124 36 plate, sheet or strip, both hot and 33123 31 cold rolled or cold finished) . . . . 7225.10.0000 (NA) 33167 31 7225.20.0000 32123 35 7225.30.0000 33123 37 7225.40.0000 33123 39 7225.50.0000 33167 35 7225.90.0000 7226.10.0000 7226.20.0000 7226.91.0000 7226.92.2000 7226.92.4000 7226.99.0000 33122 39 Alloy steel (except stainless, 33124 38 semifinished wire rods, finished structural 33124 41 shapes, 3 inches and under) and bars, 33168 31 hot rolled, including structural shapes under 3 inches and cold finished. . 7227.10.0000 7227.10.0000 7227.20.0000 7227.20.0000 7227.90.0000 7227.90.1030 7228.20.0000 7227.90.1060 7228.30.8000 7227.90.2030 7228.40.0000 7227.90.2060 7228.50.5000 7227.90.6005 7228.60.5000 7227.90.6050 7228.70.0000 7228.20.1000 7228.80.0000 7228.20.5000 7228.30.8005 7228.30.8050 7228.50.5005 7228.50.5050 7228.60.6000 7228.60.8000 7228.70.3020 7228.70.3040 7228.70.3060 7228.70.3080 7228.70.6000 7228.80.0000 33124 48 Alloy steel (except stainless, finished tool steel, high speed). . . . . . . . . . 7228.10.0000 7228.10.0010 7228.10.0030 7228.10.0060 33124 49 Alloy steel (except stainless, finished tool steel, except high speed). . . . . . . 7228.30.5000 7228.30.2000 7228.50.1000 7228.30.4000 7228.60.1000 7228.30.6000 7228.50.1010 7228.50.1020 7228.50.1040 7228.50.1060 7228.50.1080 7228.60.1030 7228.60.1060 33170 32 Alloy steel (except stainless, finished oil country goods and line pipe. . . . . . . . . . . . . . . . . 7304.10.5020 7304.10.5020 7304.10.5050 7304.10.5050 7304.10.5080 7304.10.5080 7304.20.3500 7304.20.3010 7304.20.6000 7304.20.3020 7304.20.8000 7304.20.3030 7304.21.6000 7304.20.3040 7304.29.3050 7304.20.3050 7304.29.6000 7304.20.3060 7305.11.5000 7304.20.3080 7305.12.5000 7304.20.4010 7305.19.5000 7304.20.4020 7305.20.7000 7304.20.4030 7306.10.5000 7304.20.4040 7306.20.2500 7304.20.4050 7306.20.8000 7304.20.4060 7304.20.4080 7304.20.6015 7304.20.6030 7304.20.6045 7304.20.6060 7304.20.6075 7304.20.8030 7304.20.8045 7304.20.8060 7305.11.5000 7305.12.5000 7305.19.5000 7305.20.6000 7305.20.8000 7306.10.5010 7306.10.5050 7306.20.3000 7306.20.4000 7306.20.8010 7306.20.8050 33170 43 Alloy steel (except stainless, finished pressure tubing) . . . . . . . . . (NA) 7304.51.5015 7304.51.5045 7304.59.2030 7304.59.2040 7304.59.2045 7304.59.2055 7304.59.2060 7304.59.2070 7304.59.2080 7306.50.5010 33170 45 Alloy steel, including stainless, 33170 48 finished pipe and tubes, n.e.c., including 33170 63 mechanical, standard, and structural. . . (NA) 7304.41.0045 33170 64 7304.49.0060 33170 65 7304.51.1000 7304.51.5060 7304.59.1000 7304.59.6000 7304.59.8010 7304.59.8015 7304.59.8020 7304.59.8025 7304.59.8030 7304.59.8035 7304.59.8040 7304.59.8045 7304.59.8050 7304.59.8055 7304.59.8060 7304.59.8065 7304.59.8070 7304.59.8080 7304.90.3000 7304.90.7000 7305.31.6000 7305.39.5000 7305.90.5000 7306.40.1000 7306.40.1030 7306.40.1090 7306.40.5040 7306.40.5045 7306.40.5055 7306.40.5060 7306.40.5065 7306.40.5075 7306.40.5080 7306.40.5090 7306.50.1000 7306.50.3000 7306.50.5030 7306.50.5050 7306.50.5070 7306.60.3000 7306.60.7000 33170 61 Stainless steel pressure tubing, seamless. . . . . . . . . . . . . . . . (NA) 7304.41.0015 7304.49.0045 33170 62 Stainless steel pressure tubing, welded. . (NA) 7306.40.5015 33170 43 Alloy steel, including stainless, pipe 33170 45 and tubes, n.e.c. . . . . . . . . . . . . . 7304.41.0000 (NA) 33170 48 7304.49.0010 33170 63 7304.49.0040 33170 64 7304.51.0000 33170 65 7304.59.0000 33170 61 7304.90.6000 33170 62 7305.31.6000 7305.39.5000 7305.90.5000 7306.40.1000 7306.40.5000 7306.50.1000 7306.50.4500 7306.60.6500 7306.90.5000 33155 37 Alloy steel (except stainless, finished wire, plain or coated. . . . . . . 7229.10.0000 7229.10.0000 7229.20.0000 7229.20.0000 7229.90.0000 7229.90.1000 7229.90.5015 7229.90.5030 7229.90.5050 7229.90.9000 33122 51 Stainless steel ingots. . . . . . . . 7218.10.0000 7218.10.0000 33122 56 Stainless steel, semifinished blooms, billets, slabs, sheet bars, tube rounds, and skelp. . . . . . . . . . . . 7218.90.0000 7218.90.0005 7218.90.0015 7218.90.0025 7218.90.0032 7218.90.0038 7218.90.0040 7218.90.0050 7218.90.0060 7218.90.0075 7218.90.0085 7218.90.0095 33122 59 Stainless steel, semifinished 33124 61 wire rods and finished. . . . . . . . . . . 7221.00.0000 7221.00.0005 7222.10.0000 7221.00.0015 7221.00.0030 7221.00.0045 7221.00.0075 7222.10.0005 7222.10.0050 32124 53 Stainless steel, finished plates and structurals. . . . . . . . . . . . . . 7219.11.0000 7219.11.0000 7219.12.0000 7219.12.0005 7219.21.0000 7219.12.0015 7219.22.0000 7219.12.0045 7219.31.0000 7219.12.0075 7220.11.0000 7219.21.0005 7222.40.0000 7219.21.0050 7219.22.0005 7219.22.0050 7219.31.0010 7219.31.0050 7220.11.0000 7222.40.3020 7222.40.3040 7222.40.3060 7222.40.3080 7222.40.6000 33123 57 Stainless steel, finished sheet and strip, hot rolled. . . . . . . . . . . 7219.13.0000 7219.13.0030 7219.14.0000 7219.13.0060 7219.23.0000 7219.14.0030 7219.24.0000 7219.14.0060 7220.12.0000 7219.23.0030 7219.23.0060 7219.24.0030 7219.24.0060 7220.12.1000 7220.12.5000 33167 57 Stainless steel, finished sheet and strip, cold rolled. . . . . . . . . . . 7219.32.0000 7219.32.0015 7219.33.0000 7219.32.0030 7219.34.0000 7219.32.0045 7219.35.0000 7219.32.0050 7219.90.0000 7219.32.0060 7220.20.0000 7219.33.0015 7220.90.0000 7219.33.0030 7219.33.0045 7219.33.0060 7219.34.0010 7219.34.0050 7219.35.0010 7219.35.0050 7219.90.0000 7220.20.1000 7220.20.6005 7220.20.6050 7220.20.7005 7220.20.7050 7220.20.8000 7220.20.9000 7220.90.0000 33168 51 Stainless steel, finished bars, cold finished. . . . . . . . . . . . . . . 7222.20.0000 7222.20.0005 7222.30.0000 7222.20.0045 7222.20.0075 7222.30.0000 33155 52 Stainless steel, finished round wire, under 0.75 mm in diameter. . . . . . (NA) 7223.00.1015 7223.00.1030 33155 53 Stainless steel, finished round wire, 0.75 mm to under 1.5 mm. . . . . . . . . . (NA) 7223.00.1045 33155 54 Stainless steel, finished round wire, 1.5 mm and above. . . . . . . . . . . . . . (NA) 7223.00.1060 7223.00.1075 33155 57 Stainless steel finished wire, n.e.c., including flat. . . . . . . . . . . . . . . (NA) 7223.00.5000 7223.00.9000 33155 52 Stainless steel finished wire. . . . . 7223.00.0000 (NA) 33155 53 33155 54 33155 57 NA Not available. 1/ Source: 1996 edition, HARMONIZED SYSTEM - BASED SCHEDULE B, STATISTICAL CLASSIFICATION OF DOMESTIC AND FOREIGN COMMODITIES EXPORTED FROM THE UNITED STATES. 2/ Source: HARMONIZED TARIFF SCHEDULE OF THE UNITED STATES, ANNOTATED (1996).